To find your furnace filter size, check the equipment manual or filter cabinet label and compare it with the dimensions on the old filter. The large numbers on the package usually identify the nominal size, which is the shopping label. The actual size is the physical measurement of the frame.
Read both sets of numbers
A filter sold as 20 × 25 × 1 inches can measure 19½ × 24½ × ¾ inches. That is one manufacturer’s example, so check the actual dimensions for the specific model you plan to buy. This is especially useful when comparing deeper filters from different brands. See Nordic Pure’s sizing examples.
How to check the size before ordering
Turn the system off before removing a filter from an accessible slot or return grille.
Photograph the frame label and measure the outside length, width, and thickness. Write down any cabinet model or filter part number.
Compare your measurements with the new filter’s actual dimensions and the equipment or cabinet specifications. If the old filter was bent, loose, or taped in place, use the equipment specifications as your starting point.
Confirm the filter sits flat without forcing it and that the airflow arrow points in the direction specified by the equipment instructions.
What to save for next time
Keep a phone note with the cabinet model, nominal size, actual size, and filter part number. A photo of the label can save a second trip to the hardware store. Once you have the fit right, use our MERV rating and HVAC filter guide to compare filtration and replacement intervals.